Authorised Alientech dealer · MMT Performance, Nottingham KESS3 Master + free TunerPRO portal Closed · opens 7am tomorrow
MMT Performance Alientech Tools by MMT Performance

FAQ · 34 answers

Questions about KESS3 and buying from MMT

Every question this shop answers, in one place: from the people who sell, set up and support the tool.

01 · 7 questions

Choosing a KESS3

Slave or master, OBD, bench and boot, what a kit is.

What is the difference between a KESS3 slave and a master?

A master tool opens and saves any file it reads, so you write your own maps in tuning software. A slave tool is linked to one master: the files it reads go to that master to be tuned, and it writes back only what that master sends. Buy a slave from us and that master is MMT.

What do OBD, bench and boot mean?

OBD reads and writes through the diagnostic socket with the ECU still in the vehicle. Bench connects to the ECU out of the vehicle, through its connector. Boot opens the ECU and connects to the board, for units that cannot be read any other way. KESS3 does all three in one tool, for the protocols that are active on it.

Slave or master: which should I buy?

A slave reads and writes; its files are tuned by its master. Buy a slave from MMT and MMT tunes every file in house, so you need no tuning software or calibration skills, and the tool costs less. A master opens and saves every file and is for people who write their own maps. A slave can be upgraded to master later.

Can I buy the KESS3 tool on its own?

Yes. The KESS3 hardware with its cables and case is £756. It needs protocols before it can read a vehicle, which is why most people buy a kit.

What else do I need to use KESS3?

A Windows laptop with Alientech’s software, an internet connection to send files and stable power for the vehicle or ECU while you read and write. MMT sets the tool up with you and trains you on it.

What do I need to tune with a master?

Calibration software to edit the maps — ECM Titanium or the software you already use — and the experience to write them. Not writing maps yet? The same kit as a slave has MMT tune every file.

Does the KESS3 work on its own?

It needs protocols first: Alientech activates them on the tool for each group of vehicles and way of connecting, as a slave or a master. That is why most people buy a kit, which has both.

02 · 7 questions

Vehicles & coverage

Coverage, vehicle groups, gearboxes.

Which vehicles does KESS3 cover?

Protocols are sold by vehicle group: cars and LCVs; bikes, ATVs and UTVs; agriculture, trucks and buses; marine and PWC. Coverage is decided ECU by ECU, so check Alientech’s official vehicle list, or send us the ECU reference on WhatsApp and we will tell you before you buy.

How do I know if KESS3 reads my vehicle?

Alientech publishes every supported ECU with the way it is read (OBD, bench or boot). Or send MMT the make, model, engine and year — ideally with a photo of the ECU label — and we tell you which kit reads it before you buy.

The list says bench or boot, not OBD. Can I still tune it?

Yes, with a kit that includes bench & boot protocols. The ECU comes out of the vehicle for the read and the write; the tune is the same.

Does KESS3 read gearbox controllers (TCU)?

Many of them, by OBD or on the bench, under the same vehicle-group protocols. Check the gearbox on Alientech’s list or ask MMT.

My ECU is not on the list. What now?

Alientech adds ECUs with its updates, which is what the subscription pays for. Send MMT the details: we tell you if support is coming, or how we can do the job for you on our own tools.

Which vehicle group do I need?

Car & LCV for cars and vans; Bike, ATV & UTV for motorbikes and quads; Agriculture, Truck & Bus for tractors, trucks, buses and plant; Marine & PWC for boats and jet skis. Build your KESS3 lets you pick more than one.

Will it read my vehicle?

Alientech’s vehicle list names the ECUs it reads and how. Quicker still: send MMT the make, model and engine, or a photo of the ECU label, on WhatsApp, and we check it before you buy.

03 · 9 questions

Prices, licences & updates

What a kit costs, adding protocols, the subscription.

Is there a subscription?

Each protocol licence comes with a subscription period that brings Alientech’s updates and new vehicles; renewals are sold separately. Every kit on this site lists exactly what is in it.

Can I upgrade from slave to master later?

Yes. Alientech sells slave-to-master upgrades for each protocol group, so the tool you start with is the tool you keep. Ask MMT when you are ready.

How much is a KESS3 in the UK?

A complete KESS3 kit from MMT starts at £1,250: the tool, its cables and case, the protocols for one vehicle group and 12 months of Alientech updates. The price depends on the vehicles, the connection (OBD, or OBD with bench and boot) and whether it is a slave or a master. Every kit and its price is in the table on this page.

Why does a KESS3 not have one price?

Because the tool on its own does nothing: Alientech activates protocols on it, one group of vehicles and one way of connecting at a time, as a slave or a master. A kit is the tool plus the protocols you choose plus the subscription, so the price follows what you will tune.

Can I add bench and boot or another vehicle group later?

Yes. Protocols are added to the tool you already have; you do not buy a second KESS3. Send MMT your tool’s serial number and what you want to add, and we tell you the price.

What is the subscription?

Every kit includes 12 months of Alientech’s updates and new vehicles for the protocols on the tool. After that it is renewed each year to keep receiving them.

What happens after the 12 months of updates?

The subscription is renewed each year to keep receiving Alientech’s updates and new vehicles, through MMT as your dealer. Renew before it has been expired for 60 days: after that Alientech adds a realignment fee.

Do I need a new KESS3 to add protocols?

No. Protocols are activated by Alientech on the KESS3 you already own, on its serial number. Nothing is posted and nothing has to be sent back.

My KESS3 was bought somewhere else. Can I add protocols?

If it is a master, or was bought from MMT, yes. A slave belongs to its master, so protocols for a slave of another master go through that master. Send MMT the serial number and we check.

04 · 2 questions

Files by MMT

Who tunes, how a file comes back.

How do I get my files back from MMT?

Read the vehicle with your KESS3, upload the file to your MMT portal, and MMT tunes it in house. You get a message when it is ready, download it from the portal and write it back with the same tool.

Who tunes the files?

MMT. A slave reads and writes; each file goes to MMT through your portal, is written in house in Nottingham and checked on our own rolling road, and comes back ready to write. You need no tuning software or calibration skills.

05 · 5 questions

Buying from MMT

Genuine tools, ordering, delivery.

Are the tools genuine?

Every tool on this site is supplied by MMT Performance as an authorised Alientech dealer and registered to you. Cloned tools damage ECUs and get no updates; we do not sell or support them.

Do you deliver?

Yes, across the UK, or collect from MMT in Nottingham. When you order, MMT confirms the delivery date with you.

Is it genuine and registered to me?

Yes. MMT Performance is an authorised Alientech dealer: every tool is genuine, registered to you and activated by Alientech. We never sell clones.

Is anything posted?

No. Alientech activates DynoDrive on your KESS3’s serial number, so nothing is posted and the tool never leaves you. Send MMT the serial with your order.

How do I order?

Send MMT a message on WhatsApp or call: we confirm what you need, the price and the delivery before you pay.

06 · 4 questions

Powergate & DynoDrive

Remote tuning and the road dyno.

What does DynoDrive need?

A KESS3 and the vehicle connected by OBD. It is activated on your tool; there is no extra hardware.

What does DynoDrive measure?

Power, torque, acceleration and braking during a run on the road, so you can show before-and-after figures for a tune.

How does my customer use Powergate 4?

They plug Powergate 4 into the vehicle’s OBD socket and use the Powergate app on their phone to read the ECU. The file comes to you, you send the tune back, and they write it.

Which vehicles does Powergate 4 cover?

Ask MMT with the vehicles you want to sell it for: we check coverage before you order.

MMT Performance · Nottingham

Your question is not here? Ask MMT.

Closed · opens 7am tomorrow. Send us the vehicle or the ECU reference and we will tell you what reads it and what it costs.