Coverage
Will it work on my vehicle?
KESS3 coverage is decided ECU by ECU. Check Alientech’s own list, or send MMT the details and we will tell you which kit reads it before you buy.
Check the official list
Alientech publishes every supported vehicle and ECU, with the connection (OBD, bench or boot) for each.
Alientech vehicle listOr ask MMT
Send us these on WhatsApp and we will tell you what reads it:
- Make, model, engine and year
- A photo of the ECU label, if you have it
- What you want to do with it
Three ways in
OBD, bench or boot: how KESS3 reaches the ECU
Alientech’s list gives the method for each ECU. A kit with OBD, bench & boot covers all three.
OBD
ECU stays in the vehicle
Through the diagnostic socket under the dash. The quickest way in, and the first one to try on every ECU Alientech supports by OBD.
Bench
ECU out, connector intact
The ECU comes out of the vehicle and KESS3 connects to its own connector. For ECUs that cannot be written by OBD, and for a full backup before tuning.
Boot
ECU opened on the bench
KESS3 connects to boot points on the board itself, with a positioning frame or probes. For protected ECUs and for recovering a failed write.
The ECU label
What to photograph
One clear photo of the label answers most questions. These are the lines that matter:
Send the photo- Who made it
- Bosch, Continental, Delphi, Denso, Marelli, Siemens and so on — printed at the top of the label.
- The hardware number
- Bosch prints it as 0 281 0xx xxx on diesels and 0 261 xxx xxx on petrols; other makers use their own.
- The software number
- Often on the same label or in the vehicle’s diagnostic report.
- The car maker’s part number
- For example 03L 906 018 on a VW group ECU.
Coverage questions
Before you choose a kit
How do I know if KESS3 reads my vehicle?
Alientech publishes every supported ECU with the way it is read (OBD, bench or boot). Or send MMT the make, model, engine and year — ideally with a photo of the ECU label — and we tell you which kit reads it before you buy.
The list says bench or boot, not OBD. Can I still tune it?
Yes, with a kit that includes bench & boot protocols. The ECU comes out of the vehicle for the read and the write; the tune is the same.
Does KESS3 read gearbox controllers (TCU)?
Many of them, by OBD or on the bench, under the same vehicle-group protocols. Check the gearbox on Alientech’s list or ask MMT.
My ECU is not on the list. What now?
Alientech adds ECUs with its updates, which is what the subscription pays for. Send MMT the details: we tell you if support is coming, or how we can do the job for you on our own tools.
Which vehicle group do I need?
Car & LCV for cars and vans; Bike, ATV & UTV for motorbikes and quads; Agriculture, Truck & Bus for tractors, trucks, buses and plant; Marine & PWC for boats and jet skis. Build your KESS3 lets you pick more than one.
MMT Performance · Nottingham
Not sure which kit? Ask the people who tune the files.
Opens 7am today. Send us the vehicle or the ECU reference and we will tell you what reads it and what it costs.